Installing MEmu

Owned by ZL Support
Last updated: Jul 29, 2024
2 min read

Please read the Terms of Use for Materials on ZennoLab

Table of contents

1.Download the installer from this link - offline installer.

It is important to download the offline installer, because antiviruses can swear at its online version.

 

2.Run the installer file

  • To change the path, click in the lower right corner "Custom"

  • Make sure there is enough free space on the selected disk.
    ZennoDroid now supports multithreading and each thread requires its own system image (i.e. expect that the emulator itself will take about 1 GB and additionally, at least 2 GB of hard disk space for of each simultaneously running thread).

  • Then click "Quick Install"

3. Wait until the end of the installation and close the installer window using the cross in the right corner

4. Start Multi-Memu from a shortcut on your desktop or from the start menu.

5. Download images of the required Android versions.

By default, only Android 7.1 is available in Memu (this version is recommended for work, since it is the most stable). To be able to create and work with other versions, you must first download them.

Android 4.4 is a very old version and is not supported.

6. Click “Start” next to the desired virtual machine to start it and make sure everything works fine.

If it does not start (it hangs at some percentage for more than half a minute), then you need to check if hardware virtualization is enabled and if Hyper-V is disabled. You can find instructions in the ZennoDroid System Requirements article, in the Useful Links section.

7.If the virtual machine has started and works without errors, then you can proceed with the installation of ZennoDroid.