...
Where and how the project is carried out
When the project is created and tested, it is ready to go. To launch the template, open the ZennoPoster program. Click the Add button and select the project file you want to run. You can select multiple files at once. After that, you need to set the execution parameters. Select a project, or several, if the parameters for them are the same, and in the lower part of the program window make the execution settings. The added projects will remain in ZennoPoster after its reboot.
Opportunities
When executing projects, you can:
Limit the simultaneous execution of a project by several threads. For example, a total of 10 streams have been launched, and the hotmail.com registration template will work simultaneously on no more than three.
Force the project to run until it runs without errors, for example 100 times.
Set only 100 attempts to complete the project, and it does not matter how they end - successfully or not.
Stop project execution after 20, for example, unsuccessful executions in a row.
Establish the necessity or desirability of running the project through a proxy.
Set the rule according to which proxies will be taken from ProxyChecker.
Set up a project to run at a specific time one or more times, for example, every five minutes or once every other day.
Settings
On the Settings tab, you can make basic settings for running projects and using a proxy.
...
How much to do - indicates the number of project executions.
Maximum threads - indicates the maximum number of threads for this project (simultaneous executions).
Priority - the priority of the project is selected (from Low to Critical). Priority threads can interrupt a request for an instance of lower priority threads.
Tags - allows you to group projects by adding different tags to them.
Proxy - select how the project will work with a proxy:
Do not use - execution without a proxy with a real IP address.
If possible - if ProxyChecker has "live" proxies, then the project will be executed using them, if there are no proxies, then without them.
Use (without deletion) - proxies in the project are used without deleting them from the list of "live" proxies in ProxyChecker.
Use - proxies in the project are used with removal from the list of "live" proxies in ProxyChecker.
Rules - selection of a rule or rules by which a proxy is taken from the list of “live” proxies used for the project. Rules are created in ProxyChecker.
Stop
On the Stop tab, you select the conditions under which the project stops.
...
Completion conditions - the project will end when one of the following conditions is met:
Number of successes - indicates the number of successfully completed projects, upon reaching which the project ends.
Number of failures in a row - indicates the number of unsuccessful projects completed in a row, upon reaching which the project ends.
If you specify " -1 " in these cells, the project will be executed without stopping.
Log
On the Log tab, notifications about the progress of the project are recorded: errors, marks about successful / unsuccessful project execution.
timetable
The Schedule tab is used to configure the execution of projects by time.
...
Scheduler
The Enable checkbox is responsible for activating the scheduler.
Track. start: - the date and time of the start of the project according to the schedule is displayed.
Add number of attempts - adds the required number of attempts for one run of the scheduler.
The Zero successes checkbox is responsible for resetting the success counter from the Stop tab.
When to repeat
Start: - indicates the date and time of the start of the scheduler operation.
...
button to update the start time to the current one.
Ending:
Without end - the schedule will run continuously.
Finish after N repetitions - indicates the number of project executions before shutdown.
Finish by - indicates the date and time when the scheduler will end.
How to repeat - indicates the frequency with which the project will be executed the number of times specified in the Add number of attempts box:
Every N minutes.
Every N day, at N time.
Every working day, at N time.
Show execution log - the scheduler log is displayed, where you can see when and what was started according to the schedule.
note
A project in ZennoPoster has several states.
In these states, the project is stopped and will not perform tasks until you manually start it.
...
Stopped
For example, you need to free up computer resources occupied by ZennoPoster. You can stop the project (s), then its settings will not change, it just stops running.
Click Continue to continue . The project is stopped softly, i.e. projects running at the time of shutdown will be completed. You can interrupt the execution without waiting for the current projects to be completed. To do this, click on the added project and select Abort from the context menu.
...
Stops
After pressing Stop , the project will stop when it finishes the last task, until that moment it will be in the Stopped state.
...
Mistake
The project enters this state when the project file has been deleted. It is displayed in the list of projects, but it is not on the hard disk, you need to specify the new location of the project file.
Projects that have no tasks are in these states.
...
Ready
The project has successfully completed all tasks. Or exited upon reaching the required number of successful executions.
...
Just added
You have just added this project and it has not received any assignments yet.
...
Execution ended with errors
The maximum number of unsuccessful consecutive project executions has been reached. You can specify the number of consecutive unsuccessful project executions, after reaching which the project will go into this state. This may be necessary if the project consumes some valuable resource. In order not to find out that all the money on the account of the captcha recognition service ran out due to the fact that the site changed the registration form while you were sleeping, use this setting.
The project is in this state during execution.
...
Performance
The project is in progress.
Not enough proxy
The project is temporarily not running because there are no proxies it needs in ProxyChecker. When proxies appear, it will continue to work.
...
Planned
The project is scheduled and is waiting for new tasks to come from the task scheduler. If you see this icon, it means that tasks will come someday.
| Page Tree |
|---|
...
| icon | false |
|---|---|
| title | This page has been translated automatically |
...
We want to provide you with the latest help content in your language as soon as possible. This page has been translated automatically and may contain grammatical errors or inaccuracies. We want this content to be useful to you. Please let us know at the bottom of this page if this information was helpful.
View the original article in Russian: Выполнение проектов
|